May be difficult to get good contact on the clip. I've successfully flashed 3 ps3's so far, although I had trouble figuring out how to get the clip to make good contact with the NOR chip. Although you may have it clipped on and the flasher lights up, it will still get errors when flashing if the clip is not pushed down hard enough,.

• Download E3 Flasher For Ps3 Free
• E3 Nor Flasher Ps3

- This is the new version which is a lot smaller in size and has a great new eSATA dock which is less bulky. If you are after the e3 flasher a little cheaper, check out the e3 flasher without the Harddrive dock Warning. This product is not 'hard' to install, but is very easy for you to stuff up your console if you don't read. There is no warranty on the clip device. You have 1 shot to get it onto the console. If you apply the clip wrong you will get a bad read, and the pins on the clip will be damaged.

The plug for the satadock is not Australian, but you can buy an adapter using the drop down box above. A great little breakthrough in the ps3 scence. The E3 flasher is a device that helps you downgrade PS3 consoles. It will not downgrade ALL consoles.

At the moment it only downgrades NOR consoles, not NAND. All Slims are NOR, FAT ps3s, you havee to check the model. CECHA/COK-001 up to including CECHE/COK-002W: NAND FLASH.

Picture style canon 600d. To me it gives the most natural colours and skin tones when contrast is set to -1 or -2. I'm in the Autumn Hues camp.

CECHG/SEM-001: NAND FLASH. CECHH/DIA-001 up to including CECHK/DIA-002: NOR FLASH.

CECHL/VER-001 (1-878-196-31): NOR FLASH. CECHL/VER-001: NOR FLASH.

CECHL/VER-001 and PS3 Slim 2.: NOR FLASH. And all SLIM console is NOR FLASH Another important thing to check, is that your console was on 3.55 or less out of the box or not. For exmaple if your slim console was 4.00 firmware when you turned it on for the first time, bad luck, you cannot do anything. If you cannot remember what it was on, please check the pictures below. Please note, that you also neeed the following things to complete the installation. A brain. Screwdriver.

A downgrade dongle, to put the console into service mode (we have thee for sale in the drop down box above). A micro sd card (to dump the files onto). USB stick - to install the Custom firmware Please note that the firmware E3 will put you on, is a special CFW for 3.55. There is a way to downgrade to 3.41.and from there you can update to whatever you want. There is also a special E3 custom firmware that has been made that is also compatible with the True Blue dongle. Be sure to use this if you are also buying a True Blue Dongle Below is a demo installation video. Please watch it in full before buying the product, as limited support will be provided on this product.

E3 flasher is a special device to help you programme NAND and NOR flash data. It is simplest to help you get all function with one key operation without any PC software. E3 flasher is also easy upgradable from TF card and PC USB. It has 16M Nor flash memory on board, so you can save data on E3 flasher or TF card in few min, no need connect to PC anymore.

E3 flasher has a special design for PS3, to allow user install and operation easier, and even get more function like dual boot. Here is a list to show flash version on difference console:. CECHA/COK-001 up to including CECHE/COK-002W: NAND FLASH. CECHG/SEM-001: NAND FLASH. CECHH/DIA-001 up to including CECHK/DIA-002: NOR FLASH. CECHL/VER-001 (1-878-196-31): NOR FLASH.

CECHL/VER-001: NOR FLASH. CECHL/VER-001 and PS3 Slim 2.: NOR FLASH. And all SLIM console is NOR FLASH. IMPORTANT: Please note the new E3 Flasher does not have the full size eSata dock, photos here are for illustration purposes only. Following is some picture after install.

First remove the Harddrive, the hard drive bay is on the front of the PS3 on the right side. You will see a clip covering the drive. Slide this clip to the right, then lift it up towards you. This will reveal the hard drive bay, now put your PS3 on its back and open the clip you see in the next picture, unscrew the blue screw.

Now your HDD should be loose and you can pull it out. Now remove all caps and unscrew all screws and make sure you know what screw is from what hole Now turn your PS3 on its back again, you will see a warranty sticker on the front and a bunch of screw covers pry the warranty sticker off there is another cap under there.

Now take your Torx T8 screwdriver and unscrew the 3 or 4 screws in the front on the under side: Put the PS3 with the front facing you and lift the top cover up from the back where the cables are and remove the top cover. Now on the top left and right you will see 2 cables connected, disconnect these. There will be a screw under each cable holding the power supply in place. Unscrew these and lift the power supply up.

It may take some force but eventually after some wiggling the power brick should come out. Now to remove the Blu-ray Player, There will be a black screw behind the drive, unscrew this, disconnect all the ribbon cables then gently lift the blue ray player up.

Be careful when pulling out the Blue-ray player, there still is a ribbon on the underside of the player! Lifting up the Blue-ray player will also make the button panel pop out, disconnect the small ribbon cable for the button panel from the motherboard. Disconnect the two wifi and bluetooth antenna’s and detatchthem from the meta casingl: Now unscrew the black screws: – top left on the right side of the power connection – right middle to the right of the large blue ray player connector or the battery, right above the hard drive encloseure -2 screws holding the Hard-drive enclosure in place, right bottom side where the power button board was(just above there) -1 screw in the center of the console Now gently lift up the PS3 wiggling it out of the bottom plastic case. Do this very gently and scan around your Playstation for anything blocking the board from coming out!

Download E3 Flasher For Ps3 Free

Now put the plastic case aside and put the board with the fan down in front of you, you will see 2 large clips mounted by large screws. Unscrew these, now on the same side,unscrew all screws left.

E3 Nor Flasher Ps3

Then gently lift up the top protection layer: To remove the board from the other metal case, remove all cables still on your board. Then turn your PS3 with the HDMI connections away from you and lift the board up at the front, then gently wiggle the board up to about 10 cm and then pull the board towards you. Now the board is out.